Logos Imaging

Micro Pioneer (SEA) Sdn Bhd / Logos Imaging

ORAMA II Flat Panel System

The ORAMA II system is not only the most popular DR system offered by Logos, it is also the most rugged. With an IP64 rating and a drop test rating of 1 m, the ORAMA II is the ideal solution for field use. This system offers a 14” x 17” image area, 8 mm bottom border, and is shielded for up to 330 kV sources. Coupled with the ASÝRMATOS II interface, the ORAMA II provides users with 400 m line of site wireless operation. When used in conjunction with a Golden Engineering XRS3, the system provides over 60 mm of steel penetration as well as organic detection (optional CHRÓMA module required for organic detection).

Product Fact

The ORAMA II is Logos Imaging’s best selling flat panel system with more than 500 units in the field.

Specifications

Detector Type Amorphous Silicon with TFT
Detector Area 16.7″ x 14.1″ (423 x 358 mm)
Pixel Resolution 3,328 x 2,816 pixels
Pixel Pitch 127µm
Limiting Resolution 3.9 lp/mm
Pixel Depth 16 bits
Dimensions (Panel Only) 18.7″ x 15.7″ x 0.7″ (475 x 400 x 18 mm)
11.7 lb (5.3 kg)
Operating Temperature -4 to 122 F (-20 to 50 C)

XRS3 X-ray Source

The Golden Engineering XRS3 pulsed X-ray source is a 270 kV unit that is the most versatile, providing exceptional pentrating ability in a compact package. This lightweight source has proven it can withstand extreme environments from artic to desert conditions.

Product Fact

The redesigned XRS3 X-ray source is with battery 9% lighter and 13% smaller in volume than the previous version.

Specifications

Dimensions 5.83″ x 4.28″ x 14.20″ (148 x 109 x 361 mm)
12 lb (5.4 kg)
Output Dose Avg. 2.6 mR/pulse min, measured 12 inches from source
Pulse Rate 15 pulses per second nominal
Source Size 1/8 in. (3 mm)
Maximum Photon Energy 270 kVp
Pulse Width 25 nanoseconds
Maximum Duty Cycle 200 pulses every 4 minutes (3000 pulses per hr)

To find out more please visit : http://www.logosimaging.com/

We are ready to help and answer the question you might have.